Unsure if there's anyone around to help with this but here goes...
Had the fuel tank re-shaped/enlarged and in the process of having a new dashboard made so I've noted all the wires on the back of every gauge and temporarily fitted the old dashboard back on the tank.
So everything works except the Speedo, the Speedo hand sweeps over and back again with ignition on, the mileage and trip numbers are all there. All 5 back lightbulbs work.
There are 2 wires coming out the back of the Speedo that I cannot figure out what they're for;
1 orange (looks like a receiver maybe?) and 1 purple that's not connected to anything.
Any ideas guy's?
Speedo not working.
- rocketsteve
- Posts: 293
- Joined: Fri Dec 16, 2016 2:01 pm
Speedo not working.
To test a man's character, give him (Hoss) power.
- 502wingman
- Posts: 413
- Joined: Thu Nov 22, 2007 9:59 am
- Location: Backnang, Germany
Re: Speedo not working.
Check if these cables go down to the speed sensor at your front pulley
Peter the WingMan
Backnang, Germany
Backnang, Germany
- rocketsteve
- Posts: 293
- Joined: Fri Dec 16, 2016 2:01 pm
Re: Speedo not working.
Thanks Peter, that might be the purple wire ~ I'll need to empty out the tank and take it off to check.
Will report back when that's done.
Will report back when that's done.
To test a man's character, give him (Hoss) power.
- 502wingman
- Posts: 413
- Joined: Thu Nov 22, 2007 9:59 am
- Location: Backnang, Germany
Re: Speedo not working.
Well, check at the sensor first an see if it is still properly attached.
I also found that it is better to run the cable along the frame not to close to the distributor. Source for erratic readings
I also found that it is better to run the cable along the frame not to close to the distributor. Source for erratic readings
Peter the WingMan
Backnang, Germany
Backnang, Germany
- rocketsteve
- Posts: 293
- Joined: Fri Dec 16, 2016 2:01 pm
Re: Speedo not working.
Excellent advice - as always, it was that Purple wire, which for some strange reason I'd blanked off on my extended loom up to the new clock consol.
What a total idiot I am!!! - all is working fine now.
Thanks again.
What a total idiot I am!!! - all is working fine now.
Thanks again.
To test a man's character, give him (Hoss) power.
Re: Speedo not working.
Hi Steve,
Love to see pics of the new set up.
Love to see pics of the new set up.
- rocketsteve
- Posts: 293
- Joined: Fri Dec 16, 2016 2:01 pm
Re: Speedo not working.
Will do Peter, just waiting for the Laser Cutter to finish the clock console...
To test a man's character, give him (Hoss) power.
- rocketsteve
- Posts: 293
- Joined: Fri Dec 16, 2016 2:01 pm
Re: Speedo not working.
Around 8 gallon capacity but no wider, longer or higher than standard.
To test a man's character, give him (Hoss) power.