From where could I order heat shields for the header pipes? The normal chromed shields that are on most of the Boss Hosses.
And another question regarding the header pipes themselves: why are they differently routed on the left side? I mean, on the right side(from the rider's POV) the headers are symmetrically routed together right in the middle of the block, but on the left side the foremost pipe is longer and the whole bundle is located closer to the rider. First I thought it's only on my Kannon as it has a custom made exhaust, but then I googled some photos of big block Boss Hosses and noticed the same goes for them too.
502 BB heat shields
- BeefcakeBiker
- Posts: 20
- Joined: Mon Mar 14, 2016 3:59 am
- Location: TEXAS
502 BB heat shields
- Coca-Cola cowboy -
2009 Boss Hoss LS3 Super Sport![burnout :burnout:](./images/smilies/burnout.gif)
2009 Boss Hoss LS3 Super Sport
![burnout :burnout:](./images/smilies/burnout.gif)
-
- Posts: 306
- Joined: Wed Oct 31, 2012 1:38 pm
- Location: Chesterfield Township, Michigan
Re: 502 BB heat shields
If you know for sure they are the exact same headers that Boss Hoss uses, then I would say it's a good bet you could possibly order them from Boss Hoss Factory.
- BeefcakeBiker
- Posts: 20
- Joined: Mon Mar 14, 2016 3:59 am
- Location: TEXAS
Re: 502 BB heat shields
I'm not sure they are the exact same headers, but they do look very similar. But do you know what I mean by the headers being slightly different on the big block? Check the photos I attached and you'll see what I mean. Can anyone tell me why they're different?Triker wrote:If you know for sure they are the exact same headers that Boss Hoss uses, then I would say it's a good bet you could possibly order them from Boss Hoss Factory.
- Attachments
- Coca-Cola cowboy -
2009 Boss Hoss LS3 Super Sport![burnout :burnout:](./images/smilies/burnout.gif)
2009 Boss Hoss LS3 Super Sport
![burnout :burnout:](./images/smilies/burnout.gif)
- CanuckHoss
- Site Sponsor
- Posts: 2293
- Joined: Mon Nov 23, 2009 11:10 am
- Location: Airdrie, Alberta, Canada
- Contact:
Re: 502 BB heat shields
Th right side heads are close back to the driver also...heads not equal distance from the back of the motor
CanuckHoss
![Image](https://i.imgur.com/vHkEMRM.jpg)
Barry Radu, President Destination Cycles
Airdrie, Alberta Canada
"Just BE HAPPY!! BE HAPPY!! BE HAPPY!!"--Abraham
![Image](https://i.imgur.com/vHkEMRM.jpg)
Barry Radu, President Destination Cycles
![Image](http://weathersticker.wunderground.com/weathersticker/miniDial/language/www/global/stations/71877.gif)
"Just BE HAPPY!! BE HAPPY!! BE HAPPY!!"--Abraham