Page 1 of 1
Air Filter Suggestions
Posted: Mon Nov 28, 2016 3:11 pm
by Wild Bill
Any suggestions for upgrading the stock air filter for my 2001 502?
Currently running 7" diameter X 4" tall K&N with metal top that has been trimmed back on the left and right sides. The filter has to be squished down an inch at the rear to clear the tank.
Chopper City's unit is no longer available.
Thanks!
Bill
Re: Air Filter Suggestions
Posted: Fri Dec 16, 2016 6:47 am
by Conrad
Hey Bill. I may be a little late on the reply but in case you haven't replaced it yet here is what I used today. It is identical to what I put on 10 years ago.
Top: K&N E-4655
Base: K&N 66-0901
The metal around the top has to be trimmed off. Only the center part of the lid is used. Nothing was wrong with the old one but it had been cleaned many times and I just thought it was time to replace it. Give me a call if you want more info. There is also a long thread on the other V8 site if you want to do a search.
Conrad
Re: Air Filter Suggestions
Posted: Fri Dec 16, 2016 10:01 am
by Wild Bill
Conrad wrote:Hey Bill. I may be a little late on the reply but in case you haven't replaced it yet here is what I used today. It is identical to what I put on 10 years ago.
Top: K&N E-4655
Base: K&N 66-0901
The metal around the top has to be trimmed off. Only the center part of the lid is used. Nothing was wrong with the old one but it had been cleaned many times and I just thought it was time to replace it. Give me a call if you want more info. There is also a long thread on the other V8 site if you want to do a search.
Conrad
Conrad,
Thank You! I had put the air filter decision off while addressing other maintenance items. I'll jump right on those K&N part numbers.
Bill