Fuel Filter
Fuel Filter
The other day, I was checking the tranny fluid with the bike jacked up and running. Noticed a large puddle forming under the bike. It was gasoline from this POS filter. It had been in service for a couple of years with no problems. Then it loosened up on it's own and was leaking profusely.
https://www.facebook.com/MackChev/photo ... =3&theater
Bottom line is do not use these glass filters. If I remember correctly, a few years ago, I read on the other site that someone had a bike burn up and this type filter was suspected.
I was lucky not to have a fire.
Replaced that glass filter with an all metal one.
https://www.facebook.com/MackChev/photo ... =3&theater
https://www.facebook.com/MackChev/photo ... =3&theater
Bottom line is do not use these glass filters. If I remember correctly, a few years ago, I read on the other site that someone had a bike burn up and this type filter was suspected.
I was lucky not to have a fire.
Replaced that glass filter with an all metal one.
https://www.facebook.com/MackChev/photo ... =3&theater
Regards,
Mark
Mark
- rocketsteve
- Posts: 293
- Joined: Fri Dec 16, 2016 2:01 pm
Re: Fuel Filter
Good post Mark, checked mine and I have the full metal unit fitted- another possible worry off the list.
To test a man's character, give him (Hoss) power.
- Orlando606VetteTrike
- Posts: 310
- Joined: Sun Oct 25, 2015 1:24 pm
- Location: Winter Garden, FL
Re: Fuel Filter
Mark I just removed one of those from a guys bike. It was laying on the left valve cover. Scary
2008 606 Corvette Trike
Re: Fuel Filter
That was my '05 that caught fire and burned down 6 years ago. The insurance company sent out a cause and origin guy to inspect the bike but he was never able to determine for sure what the cause was, although I did have a glass filter that was shattered, but he couldn't tell for sure whether the glass broke before the fire or because of the fire. At any rate I would never use a glass filter again. Metal can type filter only.
2009 350/385 MBH bike
- 502wingman
- Posts: 413
- Joined: Thu Nov 22, 2007 9:59 am
- Location: Backnang, Germany
Re: Fuel Filter
I bought exactly this type of glas filter a couple of years ago because I liked to be able to see if it is dirty or so. I never installed it because that piece of crap was leaking from the first second. Never got it thight and also the construction is slowing down the flow of fuel. That filter is cutting the diameter of the line in about half
Peter the WingMan
Backnang, Germany
Backnang, Germany
- Carl La Fong
- $ite $upporter
- Posts: 823
- Joined: Wed Jun 11, 2008 6:06 pm
- Location: Valley Mills, Texas
- Contact:
Re: Fuel Filter
Jeg"s, Summit or any good supplier will have billet aluminum filters with replaceable 100 micron screens. I got mine from Jeg's8
- The Mindless Philosopher
- Posts: 422
- Joined: Mon Jul 04, 2016 3:24 pm
Re: Fuel Filter
I have two of those glass filters, one on the main line and one on my auxiliary. Have been using them for about two years.
The ends can came loose during installation, and went undetected for a while. I discovered a few drips from them after a few rides.
I resolved the issue by tightening the hose barbs on the end caps and then re-installing the fuel lines. I rolled the fuel lines a little, so that they naturally want to twist in the direction opposite the direction the ends/hose barbs want to turn to loosen up. The opposing forces work kind of like a rubber lock washer.
I inspect them regularly, and will continue to keep an eye on them.
Thank you for the info!
The ends can came loose during installation, and went undetected for a while. I discovered a few drips from them after a few rides.
I resolved the issue by tightening the hose barbs on the end caps and then re-installing the fuel lines. I rolled the fuel lines a little, so that they naturally want to twist in the direction opposite the direction the ends/hose barbs want to turn to loosen up. The opposing forces work kind of like a rubber lock washer.
I inspect them regularly, and will continue to keep an eye on them.
Thank you for the info!
Re: Fuel Filter
Yes, when I read of Sonny's fire on the other board, the glass filter was only suspected. I like you thought with the proper installation bla-bla-bla. I would be fine.The Mindless Philosopher wrote:I have two of those glass filters, one on the main line and one on my auxiliary. Have been using them for about two years.
The ends can came loose during installation, and went undetected for a while. I discovered a few drips from them after a few rides.
I resolved the issue by tightening the hose barbs on the end caps and then re-installing the fuel lines. I rolled the fuel lines a little, so that they naturally want to twist in the direction opposite the direction the ends/hose barbs want to turn to loosen up. The opposing forces work kind of like a rubber lock washer.
I inspect them regularly, and will continue to keep an eye on them.
Thank you for the info!
After all, you can visually see what is going on with the filter and you can clean or replace the element when it gets dirty.
Then consider that the filter is installed 6 or 8 inches downstream of the petcock. Let's say a fire does get started in the area of the fuel filter. You most likely will not be able to get a hand on the petcock to shut the fuel off. Just has too many ill consequences.
Nothing but a steel cased filter for me.
Regards,
Mark
Mark
- The Mindless Philosopher
- Posts: 422
- Joined: Mon Jul 04, 2016 3:24 pm
Re: Fuel Filter
Mine are installed about 6 inches or so behind the tank and under the seat, around 18 inches or so away from the tank's petcock, just before the three-way tank selector valve I attached to the frame behind my left leg. The trike gives me a bit more wiggle room than a bike would.
I don't know whether this would buy me much more time, but at least the drips won't be anywhere near the engine, and likely won't hit the transmission case either.
It was leaking directly onto the garage floor when I originally discovered it. Haven't had any issues since.
Don't get me wrong. I'm not trying to argue or anything. Just stating that I will be keeping a closer eye on things, is all.
I don't know whether this would buy me much more time, but at least the drips won't be anywhere near the engine, and likely won't hit the transmission case either.
It was leaking directly onto the garage floor when I originally discovered it. Haven't had any issues since.
Don't get me wrong. I'm not trying to argue or anything. Just stating that I will be keeping a closer eye on things, is all.
Re: Fuel Filter
I don't understand why these filters are made of glass , what's wrong with clear plastic tubing .
No mater where you install these glass filters if they break and the fuel lands anywhere hot like exhaust pipes especially they are a hasard . A fuel pressure gage will tell you if you have fuel flow or not , you don't have to actually see the flow .
No mater where you install these glass filters if they break and the fuel lands anywhere hot like exhaust pipes especially they are a hasard . A fuel pressure gage will tell you if you have fuel flow or not , you don't have to actually see the flow .
- The Mindless Philosopher
- Posts: 422
- Joined: Mon Jul 04, 2016 3:24 pm
Re: Fuel Filter
For the sake of seeing when the filter is getting plugged and needs to be removed and cleaned. They are designed to be re-used.hogv8 wrote:I don't understand why these filters are made of glass , what's wrong with clear plastic tubing .
No mater where you install these glass filters if they break and the fuel lands anywhere hot like exhaust pipes especially they are a hasard . A fuel pressure gage will tell you if you have fuel flow or not , you don't have to actually see the flow .
As to why they are made of glass and not a gasoline resistant plastic? I don't know.
Re: Fuel Filter
The Mindless Philosopher wrote:For the sake of seeing when the filter is getting plugged and needs to be removed and cleaned. They are designed to be re-used.hogv8 wrote:I don't understand why these filters are made of glass , what's wrong with clear plastic tubing .
No mater where you install these glass filters if they break and the fuel lands anywhere hot like exhaust pipes especially they are a hasard . A fuel pressure gage will tell you if you have fuel flow or not , you don't have to actually see the flow .
As to why they are made of glass and not a gasoline resistant plastic? I don't know.
I understand being able to see if they are dirty but they are also designed so yo u can see that yo u have fuel flow .