LS 470 for Berzerker
- Grand Canard
- Posts: 371
- Joined: Fri Apr 02, 2010 2:02 am
- Location: Lake Arthur, Louisiana
LS 470 for Berzerker
Just ordered this engine for Berzerker from Mast Motorsports and expect engine to be ready in February, then off to have custom sheet metal intake built, then re-wire the bike.
Berzerker went through 3 engines for a grand total of 1852 miles with engine #3 seizing.
Mast only manufactures and builds LS stuff / engines; no Ford, Mopar, Big Block Chevy. etc, purely LS. Mast is the LS engine expert. They manufacture many LS parts to include heads, cams, etc.
http://mastmotorsports.com/2010/index.php
MY ENGINE
RHS 470 Solid Roller
Specs:
Type: RHS 7.7L
Displacement: 470 Cubic Inches
Compression Ratio: 12.5: 1 (not a mis-type)
Bore x Stroke: 4.165 x 4.300
Rev Limit: 8500 RPM
Crank: Callies Ultra Billet
Rods: Callies Ultra I-Beam Billet
Pistons: Mahle Motorsports
Cam: Mast Custom 3-Bolt Core Cam
Heads: Mast LS7 305cc
Intake: Custom Sheet Metal
Valve Springs: Mast Dual Solid Roller
(estimated 800+HP and 650+Torque)
Black RHS Tall Deck Aluminum Block
Plateau Honed to 4.165
True Surfaced Deck
Engine Block Debured
Blueprinted Shortblock
Cleveite Coated Rod and Crank Bearings
Callies 4.300" Ultra Billet Crankshaft
Callies Ultra Billet I-Beam Connecting Rods
Mahle Motorsports Coated 2618 Pistons
Polished Mast Motorsports CNC LS7 305 Heads
Titanium Intake Valve
Titanium Exhaust Valve
ARP Head Bolts
ARP Main Studs
Cometic Headgaskets
Comp Race LS Solid Roller Lifters
Mast I Piece Chrome Molly Pushrods
Mast Dual Solid Roller Valve Springs
T&D 1.8 Shaft Mount Rocker Arms
Mast Solid Roller Cam
FAST 65lb/hr Fuel Injectors
Crankshaft Position Sensor
Camshaft Position Sensor
Oil Temperature Sensor
Ignition Coils
Katech Ported LS7 Dry Sump Oil Pump
ARE LS7 Style Pan
Mezierre Electric Water Pump
Circle D Flexplate
Runs on Premium 91-93 Octane
Going to be bitch-N !!
Berzerker went through 3 engines for a grand total of 1852 miles with engine #3 seizing.
Mast only manufactures and builds LS stuff / engines; no Ford, Mopar, Big Block Chevy. etc, purely LS. Mast is the LS engine expert. They manufacture many LS parts to include heads, cams, etc.
http://mastmotorsports.com/2010/index.php
MY ENGINE
RHS 470 Solid Roller
Specs:
Type: RHS 7.7L
Displacement: 470 Cubic Inches
Compression Ratio: 12.5: 1 (not a mis-type)
Bore x Stroke: 4.165 x 4.300
Rev Limit: 8500 RPM
Crank: Callies Ultra Billet
Rods: Callies Ultra I-Beam Billet
Pistons: Mahle Motorsports
Cam: Mast Custom 3-Bolt Core Cam
Heads: Mast LS7 305cc
Intake: Custom Sheet Metal
Valve Springs: Mast Dual Solid Roller
(estimated 800+HP and 650+Torque)
Black RHS Tall Deck Aluminum Block
Plateau Honed to 4.165
True Surfaced Deck
Engine Block Debured
Blueprinted Shortblock
Cleveite Coated Rod and Crank Bearings
Callies 4.300" Ultra Billet Crankshaft
Callies Ultra Billet I-Beam Connecting Rods
Mahle Motorsports Coated 2618 Pistons
Polished Mast Motorsports CNC LS7 305 Heads
Titanium Intake Valve
Titanium Exhaust Valve
ARP Head Bolts
ARP Main Studs
Cometic Headgaskets
Comp Race LS Solid Roller Lifters
Mast I Piece Chrome Molly Pushrods
Mast Dual Solid Roller Valve Springs
T&D 1.8 Shaft Mount Rocker Arms
Mast Solid Roller Cam
FAST 65lb/hr Fuel Injectors
Crankshaft Position Sensor
Camshaft Position Sensor
Oil Temperature Sensor
Ignition Coils
Katech Ported LS7 Dry Sump Oil Pump
ARE LS7 Style Pan
Mezierre Electric Water Pump
Circle D Flexplate
Runs on Premium 91-93 Octane
Going to be bitch-N !!
Last edited by Grand Canard on Sat Feb 23, 2013 11:10 pm, edited 1 time in total.
"Work when you have to,
Quit when you can.
Follow your dream
Be your own man.
Drink when you're thirsty
Whoop when you're high.
Love a good woman...
Ride till you die."
- Harold Blocker
- Outdrank the Perverator
- Posts: 134
- Joined: Sun Apr 20, 2008 5:23 am
- Location: Southeast Misssouri
- Contact:
Re: LS 470 for Berzerker
Can't wait to hear that monster scream!
Re: LS 470 for Berzerker
Grand,
WOW! - incredible build and premium parts going in, very impressive HP and TQ numbers, 8,500 red line and pump gas.
That is going to be one sick setup, really looking forward to reading the progress on this. Please keep us posted with photos
if possible.
Also, can you post a new avatar? When the the site hosting was transferred a while back, many avatars were lost.
I need too do mine too
Thanks
WOW! - incredible build and premium parts going in, very impressive HP and TQ numbers, 8,500 red line and pump gas.
That is going to be one sick setup, really looking forward to reading the progress on this. Please keep us posted with photos
if possible.
Also, can you post a new avatar? When the the site hosting was transferred a while back, many avatars were lost.
I need too do mine too
Thanks
Re: LS 470 for Berzerker
That is going to be a NASTY ride! Hope to see/hear it in person someday ... 8500RPM Any idea what the powerband will look like?
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
- Grand Canard
- Posts: 371
- Joined: Fri Apr 02, 2010 2:02 am
- Location: Lake Arthur, Louisiana
Re: LS 470 for Berzerker
The dyno sheet is from a Mast Motorsports LS-466 on pump gas, Hillborn fuel injection, and Mozez heads.
My engine will not have the Mozez heads as it requires a tall, vertical sheet metal intake manifold; the Mozez heads are full blown racing heads.
My heads will be the LS-7 305cc and will not make as much power but I was told it should dyno just over 800HP with the horizontal sheet metal intake manifold that I will have.
I suspect my power curve will be similar.
I also attached the dyno from my previous Speed-O-Motive LS-430 engine that was in my bike. This engine had a Edelbrock Victor Jr intake manifold which was unfortunately the tallest intake we could fit and HP was limited to 600hp just as Edelbrock claimed; that was the compromise, my new engine will NOT HAVE ANY COMPROMISES aside from not having the Mozez heads.
My engine will not have the Mozez heads as it requires a tall, vertical sheet metal intake manifold; the Mozez heads are full blown racing heads.
My heads will be the LS-7 305cc and will not make as much power but I was told it should dyno just over 800HP with the horizontal sheet metal intake manifold that I will have.
I suspect my power curve will be similar.
I also attached the dyno from my previous Speed-O-Motive LS-430 engine that was in my bike. This engine had a Edelbrock Victor Jr intake manifold which was unfortunately the tallest intake we could fit and HP was limited to 600hp just as Edelbrock claimed; that was the compromise, my new engine will NOT HAVE ANY COMPROMISES aside from not having the Mozez heads.
"Work when you have to,
Quit when you can.
Follow your dream
Be your own man.
Drink when you're thirsty
Whoop when you're high.
Love a good woman...
Ride till you die."
Re: LS 470 for Berzerker
AWESOME ... sure is going to be a great ride. Keep us posted on progress if you find the time. Maybe pictures or even a video
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: LS 470 for Berzerker
Rick:
Couldn't help but notice the 8.27 AFR on the right bank
of the old engine dyno pull.
Talk about pig fat....
Think there was more HP to be had, but maybe that was
just the first pull.....dunno
Geez
Couldn't help but notice the 8.27 AFR on the right bank
of the old engine dyno pull.
Talk about pig fat....
Think there was more HP to be had, but maybe that was
just the first pull.....dunno
Geez
.
- Grand Canard
- Posts: 371
- Joined: Fri Apr 02, 2010 2:02 am
- Location: Lake Arthur, Louisiana
Re: LS 470 for Berzerker
Couldn't help but notice the 8.27 AFR on the right bank
of the old engine dyno pull.
Talk about pig fat....
I doubt that 8.27 afr is legit as it is consistent from beginning to end of dyno pull. I honestly don't know why and never asked them about that AFR.
"Work when you have to,
Quit when you can.
Follow your dream
Be your own man.
Drink when you're thirsty
Whoop when you're high.
Love a good woman...
Ride till you die."
- Grand Canard
- Posts: 371
- Joined: Fri Apr 02, 2010 2:02 am
- Location: Lake Arthur, Louisiana
Re: LS 470 for Berzerker
Mast Motorsports gave me a shout yesterday, said that Callies expects to ship them my billet crank and rods this week! wahoo!!! been waiting over 3 months.
I hope to pick-up me engine end of next week.
I hope to pick-up me engine end of next week.
"Work when you have to,
Quit when you can.
Follow your dream
Be your own man.
Drink when you're thirsty
Whoop when you're high.
Love a good woman...
Ride till you die."
Re: LS 470 for Berzerker
Great news, looking forward to the finished product!
DeLand, FL.
"This is just one of the many reasons I love V8Bikers; able to openly display T&A, curse, say what you will;
able to be a fucking man here. Thanks Bill" - Grand Canard
Re: LS 470 for Berzerker
Grand Canard wrote:Mast Motorsports gave me a shout yesterday, said that Callies expects to ship them my billet crank and rods this week! wahoo!!! been waiting over 3 months.
I hope to pick-up me engine end of next week.
AWESOME! Glad to hear the hard part (waiting) is about over ... look forward to hearing that sucker run.
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
- Grand Canard
- Posts: 371
- Joined: Fri Apr 02, 2010 2:02 am
- Location: Lake Arthur, Louisiana
Re: LS 470 for Berzerker
It's been a long time since I ordered the engine in mid-December, but it's FINALLY together and headed to the dyno in a few days.
The long delay was due to the 4 mon. lead time on billet crank and rods and Mast failing to send the heads off for polishing.
The intake / throttle body and the rocker covers/coils aren't mine; just a loaner to allow engine dyno, mine will be custom fitted sheet metal w/ a 105mm Wilson throttle body.
Will post the dyno sheets, etc once they email it to me.
The long delay was due to the 4 mon. lead time on billet crank and rods and Mast failing to send the heads off for polishing.
The intake / throttle body and the rocker covers/coils aren't mine; just a loaner to allow engine dyno, mine will be custom fitted sheet metal w/ a 105mm Wilson throttle body.
Will post the dyno sheets, etc once they email it to me.
"Work when you have to,
Quit when you can.
Follow your dream
Be your own man.
Drink when you're thirsty
Whoop when you're high.
Love a good woman...
Ride till you die."
Re: LS 470 for Berzerker
Sweet, we were wondering what was going on with it.
-
- Posts: 73
- Joined: Fri Jul 22, 2011 4:52 am
Re: LS 470 for Berzerker
Looking Good,, keep us posted on progress!!
Darryl
Darryl
Re: LS 470 for Berzerker
Anxious to see the dyno run/numbers, that engine is a monster on paper for sure ... I'm sure it will be worth the long wait you've had. BTW your much more patient then I would/could be ...
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
- petitemoose
- Posts: 865
- Joined: Fri Dec 07, 2012 10:13 pm
- Location: Lakeland, FL
Re: LS 470 for Berzerker
Forget the dyno sheets ... I want to hear the monster run!!!
Who says building a border wall won't work?!? The Chinese built one over 2000 years ago and they STILL don't have any Mexicans ...
- Grand Canard
- Posts: 371
- Joined: Fri Apr 02, 2010 2:02 am
- Location: Lake Arthur, Louisiana
Re: LS 470 for Berzerker
Mast message to me;
This thing sounds BAD ASS!
We made just over 737hp and 605tq through a 90mm throttle! The engine has much more in it but it needs a bigger throttle and better intake which You will be adding!
Sweet!
I have a shiny, new Wilson 105mm waiting at home for it.
I will have Beck Racing / TRE Racing build the sheet metal intake.
It didn't make the 800+ HP I hoped for, but 1.57 HP / cu.in. not too shabby for a NA motor.
This thing sounds BAD ASS!
We made just over 737hp and 605tq through a 90mm throttle! The engine has much more in it but it needs a bigger throttle and better intake which You will be adding!
Sweet!
I have a shiny, new Wilson 105mm waiting at home for it.
I will have Beck Racing / TRE Racing build the sheet metal intake.
It didn't make the 800+ HP I hoped for, but 1.57 HP / cu.in. not too shabby for a NA motor.
"Work when you have to,
Quit when you can.
Follow your dream
Be your own man.
Drink when you're thirsty
Whoop when you're high.
Love a good woman...
Ride till you die."
Re: LS 470 for Berzerker
Sweet
- Grand Canard
- Posts: 371
- Joined: Fri Apr 02, 2010 2:02 am
- Location: Lake Arthur, Louisiana
Re: LS 470 for Berzerker
I installed the tall deck LS-470 engine last night, Berzerker now loaded into trailer for trip to TRE for custom intake manifold.
"Work when you have to,
Quit when you can.
Follow your dream
Be your own man.
Drink when you're thirsty
Whoop when you're high.
Love a good woman...
Ride till you die."
Re: LS 470 for Berzerker
Looks Wild , I see you have what looks like a electric water pump on the front of the engine , won't that interfere with your radiator ?
Jack
HOGV8
Jack
HOGV8
- Grand Canard
- Posts: 371
- Joined: Fri Apr 02, 2010 2:02 am
- Location: Lake Arthur, Louisiana
Re: LS 470 for Berzerker
Yup, will interfere BIG-TIME and would not be possible if using original BH set-up.hogv8 wrote:Looks Wild , I see you have what looks like a electric water pump on the front of the engine , won't that interfere with your radiator ?
Jack
HOGV8
My new radiator from Rons' Radiator will be set forward a few inches; my Weldon Racing or Magnafuel fuel pump will be placed where the BH waterpump previously sat.
"Work when you have to,
Quit when you can.
Follow your dream
Be your own man.
Drink when you're thirsty
Whoop when you're high.
Love a good woman...
Ride till you die."
- petitemoose
- Posts: 865
- Joined: Fri Dec 07, 2012 10:13 pm
- Location: Lakeland, FL
Re: LS 470 for Berzerker
When the bike project is done, would you like some help painting your garage?!?!
In all seriousness, you are gonna have one helluva screamer on your hands when this is done!
In all seriousness, you are gonna have one helluva screamer on your hands when this is done!
Who says building a border wall won't work?!? The Chinese built one over 2000 years ago and they STILL don't have any Mexicans ...
- Grand Canard
- Posts: 371
- Joined: Fri Apr 02, 2010 2:02 am
- Location: Lake Arthur, Louisiana
Re: LS 470 for Berzerker
You know what? I never noticed that it was pink until your post regarding paint and looking at the pics I posted!!petitemoose wrote:When the bike project is done, would you like some help painting your garage?!?!
In all seriousness, you are gonna have one helluva screamer on your hands when this is done!
It's not my garage; it's my cousins garage, I'll have to bring the pink paint to his attention!! LOL
"Work when you have to,
Quit when you can.
Follow your dream
Be your own man.
Drink when you're thirsty
Whoop when you're high.
Love a good woman...
Ride till you die."
Re: LS 470 for Berzerker
Glad you're making progress Ricky, should be awesome, and I didn't notice the pink walls either, now that's all I see, even when I look away.
- Grand Canard
- Posts: 371
- Joined: Fri Apr 02, 2010 2:02 am
- Location: Lake Arthur, Louisiana
Re: LS 470 for Berzerker
I just bought this used Kinsler cross ram set-up at a steal, only $3k! Retails for $8k
This is exotic shit, Le Mans, Indy, etc.
http://www.kinsler.com/page--Home-Page--13.html
I hope it fits, pretty sure it will; FedEx to deliver Friday.
If it does fit, will put the brakes on the TRE sheet metal.
It does have filters!
This is exotic shit, Le Mans, Indy, etc.
http://www.kinsler.com/page--Home-Page--13.html
I hope it fits, pretty sure it will; FedEx to deliver Friday.
If it does fit, will put the brakes on the TRE sheet metal.
It does have filters!
"Work when you have to,
Quit when you can.
Follow your dream
Be your own man.
Drink when you're thirsty
Whoop when you're high.
Love a good woman...
Ride till you die."